Acrylics

Square Blocks

Bar Stock

Discs

Balls

Rods

Tubes

Sheets

Acrylite®

Optix®

Plexiglas®

Bullet Proof Sheets

Cast Sheets

Cast-Abrasion Resistant Sheets

Anti Static Sheets

MIL P5425

Color Options

All Products

UHMWPE

Tygon Tubing

Metal Balls

Composite Laminates

Privacy

Domestic Selling Policy

Contact Kmac Plastics

Tapes

Felt Discs, Sheets, Strips

U Channels

Wood Screws

Sheet Metal Screws

Tapping Screws

Circuit Breakers.

Murray Circuit Breakers

Pinewood Derby Cars

Texas Longhorn Association

Goods and services provided by K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).

 

 

 

Component    Wt. %
C 0.38 - 0.43
Cr 0.8 - 1.1
Fe 96.785 - 97.84
Mn 0.7 - 1
Mo 0.15 - 0.25
P Max 0.035
S Max 0.04
Si 0.15 - 0.3
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³  

Mechanical Properties
Hardness, Brinell 277 277  
Hardness, Knoop 302 302  Converted from Brinell hardness.
Hardness, Rockwell B 99 99  Converted from Brinell hardness.
Hardness, Rockwell C 28 28  Converted from Brinell hardness.
Hardness, Vickers 292 292  Converted from Brinell hardness.
Tensile Strength, Ultimate 883 MPa 128000 psi  
Tensile Strength, Yield 685 MPa 99400 psi  
Elongation at Break 19.2 % 19.2 %  in 50 mm
Reduction of Area 60.4 % 60.4 %  
Modulus of Elasticity 205 GPa 29700 ksi  Typical for steel
Bulk Modulus 140 GPa 20300 ksi  Typical for steel.
Poisson's Ratio 0.29 0.29  Calculated
Machinability 65 % 65 %  Based on AISI 1212 as 100% machinability.
Shear Modulus 80 GPa 11600 ksi  Typical for steel.

Electrical Properties
Electrical Resistivity 2.2e-005 ohm-cm 2.2e-005 ohm-cm  specimen hardened and tempered; 20°C (68°F)
Electrical Resistivity at Elevated Temperature 2.63e-005 ohm-cm 2.63e-005 ohm-cm  specimen hardened and tempered; 100°C (212°F)
Electrical Resistivity at Elevated Temperature 3.26e-005 ohm-cm 3.26e-005 ohm-cm  specimen hardened and tempered; 200°C (390°F)
Electrical Resistivity at Elevated Temperature 4.75e-005 ohm-cm 4.75e-005 ohm-cm  specimen hardened and tempered; 400°C (750°F)
Electrical Resistivity at Elevated Temperature 6.46e-005 ohm-cm 6.46e-005 ohm-cm  specimen hardened and tempered; 600°C (1110°F)

Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F  0-100°C (32-212°F)
CTE, linear 250°C 13.7 µm/m-°C 7.61 µin/in-°F  20-400°C (68-750°F)
CTE, linear 500°C 14.6 µm/m-°C 8.11 µin/in-°F  20-600°C (68-1110°F)
Specific Heat Capacity at Elevated Temperature 0.473 J/g-°C 0.113 BTU/lb-°F  150-200°C
Specific Heat Capacity at Elevated Temperature 0.519 J/g-°C 0.124 BTU/lb-°F  350-400°C
Specific Heat Capacity at Elevated Temperature 0.561 J/g-°C 0.134 BTU/lb-°F  550-600°C
Thermal Conductivity 42.6 W/m-K 296 BTU-in/hr-ft²-°F  100°C
Thermal Conductivity at Elevated Temperature 33 W/m-K 229 BTU-in/hr-ft²-°F  600°C
Thermal Conductivity at Elevated Temperature 37.7 W/m-K 262 BTU-in/hr-ft²-°F  400°C
Thermal Conductivity at Elevated Temperature 42.2 W/m-K 293 BTU-in/hr-ft²-°F  200°C
 

UHMWPE

Tygon

Other Plastics

Hoses

 

Square Watermelon Cases


New:  

Acrylic Pig Pipes

Tube Caps & Plugs

Set Screws

Eyebolts

Threaded Rods

Lag Screws

Dowel Pins

Self Drilling Screws

Carriage Bolts

Spring Pins

Drill Bits

Taper Pins

Machine Screws

Contact Kmac Plastics      Privacy       Domestic Selling Policy

Colored Acrylic Rods and Tubes